<?xml version="1.0" encoding="UTF-8"?><xml><records><record><source-app name="Biblio" version="7.x">Drupal-Biblio</source-app><ref-type>17</ref-type><contributors></contributors><titles><title><style face="normal" font="default" size="100%">Vessel size and number are contributors to define wood density in cork oak</style></title><secondary-title><style face="normal" font="default" size="100%">European Journal of Forest Research</style></secondary-title></titles><dates><year><style  face="normal" font="default" size="100%">2011</style></year></dates><volume><style face="normal" font="default" size="100%">130</style></volume><pages><style face="normal" font="default" size="100%">1023-1029</style></pages><language><style face="normal" font="default" size="100%">eng</style></language><abstract><style face="normal" font="default" size="100%">Cork oak (Quercus suber L.) has a dense wood that allows high-quality uses. In the present work, we study the inﬂuence of vessel characteristics, measured through image analysis and optical microscopy, on wood density, measured using X-ray microdensitometry, on 40-year-old trees. Vessel area increases with cambial age (5403–33064 lm 2 ), while wood density decreases (1.229–0.836 g/cm 3 ). The number of vessels is relatively constant at 6 vessels/mm 2 , while vessel proportion in cross-section increases from 3.3% near the pith to 20.5% near the bark. In growth rings closest to the pith, with high wood density and low vessel area, the relationship between the two variables is linear (R 2 = -32.1%, P\0.01) but with increasing tree age and vessel size, the wood density remains rather constant, suggesting that decreases in density might compromise mechanical support of the tree at a stage when the increase in crosssectional area alone might not provide mechanical stability. Other anatomical characteristics not considered in this study, like large xylem rays that increase with cambial age, may be responsible for the constant density</style></abstract></record><record><source-app name="Biblio" version="7.x">Drupal-Biblio</source-app><ref-type>17</ref-type><contributors></contributors><titles><title><style face="normal" font="default" size="100%">Radial variation of vessel size and distribution in cork oak wood (Quercus suber L.)</style></title><secondary-title><style face="normal" font="default" size="100%">Wood Science and Technology</style></secondary-title></titles><dates><year><style  face="normal" font="default" size="100%">2007</style></year></dates><volume><style face="normal" font="default" size="100%">41</style></volume><pages><style face="normal" font="default" size="100%">339-350</style></pages><language><style face="normal" font="default" size="100%">eng</style></language><abstract><style face="normal" font="default" size="100%">Quercus suber L. is an important species producing cork whose wood characteristics have not been investigated a lot. Cork oak wood vessels are a striking feature and the most abundant wood tissue largely inﬂuencing density and permeability. Vessel size and distribution were studied in approximately 40 year-old and never debarked cork oaks by continuously measuring along the radial direction in the transverse section of wood discs taken at 1.3 m of height using image analysis techniques. The vessel size increases with age from 7660 ± 2286 to 21136 ± 6119 lm 2 , the conductive area from 5.4 ± 2.2 to 11.6 ± 3.9%, and the vessel density remains approximately constant between 5.2 ± 1.5 and 7.3 ± 3.5 vessels/mm 2 . In comparison with ring-porous and some evergreen oaks, cork oaks show a similar conductive area but smaller vessels. Vessel architecture is known to play an important role on oaks tolerance to hydric stress, and these cork oak trees were growing under very harsh edaphoclimatic conditions, not tolerated by other oaks. The well-developed and deep root system allowing access to constant water supply may contribute to the cork oak’s relatively high conductive area.</style></abstract></record><record><source-app name="Biblio" version="7.x">Drupal-Biblio</source-app><ref-type>17</ref-type><contributors></contributors><titles><title><style face="normal" font="default" size="100%">Within and between-tree variation in the biometry of wood rays and fibres in cork oak (Quercus suber_L.)</style></title><secondary-title><style face="normal" font="default" size="100%">Wood Science and Technology</style></secondary-title></titles><dates><year><style  face="normal" font="default" size="100%">2006</style></year></dates><volume><style face="normal" font="default" size="100%">40</style></volume><pages><style face="normal" font="default" size="100%">585-597</style></pages><language><style face="normal" font="default" size="100%">eng</style></language><abstract><style face="normal" font="default" size="100%">The variability of ﬁbre and ray dimensions was studied at three radial positions (10, 50 and 90% of radius) in 5 cork oaks (Quercus suber L.) approximately 40 years old. Uniseriate ray height and cell number as well as multiseriate ray height and width were measured in tangential sections. Fibre length, width and wall thickness were measured after maceration. The most striking features of cork oak wood were the large multiseriate rays and the frequent homocellular uniseriate rays. On average multiseriate rays were 5.16 mm high and 0.48 mm wide, and uniseriate rays contained 11 cells and were 227 lm high. Neighbour rays presented large dimensional diﬀerences but there was no radial variation and there were very small between-tree diﬀerences. The radial maintenance of high and wide rays was discussed as a means to improve water shortage in response to water stress. Fibre dimensions increased radially but diﬀered little between trees: on average, 960–1,220 lm length, 18.40–21.49 lm width and 6.66–8.07 lm wall thickness. The ray pattern showed enough variation for visual appreciation while ensuring within and between-tree uniformity. The presence of rays has to be taken into consideration for designing wood drying programs.</style></abstract></record></records></xml>