Cork suberin as an additive in offset lithographic printing inks

TitleCork suberin as an additive in offset lithographic printing inks
Publication TypeJournal Article
Year of Publication2000
AuthorsCordeiro, N., Blayo A., Belgacem N. M., Gandini A., C. Neto P., & LeNest J.-F.
JournalIndustrial Crops and Products
Volume11
Issue1
Pagination63 - 71
Date Published2000///
KeywordsAdditive, Quercus suber L., rheological properties, suberin, Tack, Vegetable oil-based ink, Viscosity, Waterless ink
Abstract

Suberin oligomers, isolated from cork (Quercus suber L.), were used as additives in ‘Waterless’ and vegetable-oil ink formulations, in the range of 2–10% w:w. The rheological behaviour of the suberin oligomers as well as of the inks, with and without suberin, were investigated as a function of temperature. It was shown that the addition of suberin induces a decrease of viscosity of both inks. The tack of pristine inks, suberin oligomers and their mixtures were determined at different temperatures: the variation of this parameter as a function of time provided information about the drying kinetics of these formulations. The tack of the ‘Waterless’ ink was found to increase with the introduction of suberin, whereas that of vegetable-oil based counterparts decreased. All the trends observed were interpreted in terms of the differences in composition between the two types of inks. Preliminary printing tests were carried out with the various suberin-containing inks

URLhttp://linkinghub.elsevier.com/retrieve/pii/S0926669099000370