Supercritical carbon dioxide extraction of acorn oil

TitleSupercritical carbon dioxide extraction of acorn oil
Publication TypeJournal Article
Year of Publication2007
AuthorsM Bernardo-Gil, G., Lopes I. M. G., Casquilho M., M Ribeiro A., M Esquível M., & Empis J.
JournalThe Journal of Supercritical Fluids
Volume40
Pagination344-348
Keywordsacorn, Extraction, Quercus rotundifolia L., Sovová model, Supercritical carbon dioxide
Abstract

Acorn fruit oil of Quercus rotundifolia L. (holm-oak) was extracted with compressed carbon dioxide in the temperature range of 35–60 ◦ C and in the pressure range of 12–21 MPa. The influences of particle size, CO2 density, solvent flow rate, and extractor geometry were studied. Two different tubular extractors were used: extractor 1 of 0.2 L of capacity, internal diameter D = 45.7 mm, height/diameter ratio H/D = 1.5, and extractor 2 of 0.09 L of capacity, internal diameter D = 21.3 mm, and H /D = 12. It was found that the yield and the initial extraction rate depend on the carbon dioxide density and superficial velocity, and on the ratio of bed height to D, at the same conditions of temperature, pressure, and particle size. In the beginning of extraction, CO2 density is the preponderant factor, but after some time of extraction, the fraction of oil directly exposed to the solvent, which is dependent on particle size, becomes the most important factor. The Sovova model was successfully applied to the description of the supercritical extraction curves of acorn oil